AUTOMATION JAYA

Kamis, 29 Februari 2024

Frequency Control Speed Regulation Experiment System

Ÿ Digunakan sebagai perangkat untuk pelatihan sekaligus alat ukur pada pelatihan / percobaan pengaturan kecepatan dari kinerja sistem kontrol yang menggunakan variabel frekuensi.
Ÿ Input power : three-phase, five Ÿ wire AC 380V±10% 50Hz/60Hz Ÿ Output power : AC 380V safety Ÿ teral output Capacity : < 1KVA Ÿ Part list:
Ÿ Control panel, workbench, frequency converter component, relay contacts training module, digital analog input and output given instruction component, three-phase asynchronous motor, motor rails, speed mechanism and other components
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Servo Motor Trainer

Ÿ Digunakan untuk menjelaskan karakteristik dan pemasangan motor servo
Ÿ ACPower:SinglephaseAC220V±10%50Hz
Ÿ Airpressure:0.4MPato0.6MPa
Ÿ DriveType:AC220V,approx.400Wservomotor
Ÿ Partlist:
Ÿ PLCmodule,theoperationbuttonmodule,theservo drive module, pneumatic module, various sensors, and other components, according to the training needs for flexible combination of modules. Manual book, Experiment
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831module.

Small Car Motion Training Equipment

Ÿ Digunakan sebagai perangkat untuk pelatihan kontrol gerakan mobil dengan koneksi sinyal sensor. Ÿ Input power : three phase
Ÿ AC 380V ± 10% 50Hz/60Hz
Ÿ Capacity : < 500VA
Ÿ Part list:
Ÿ Integrated sensor, ball screw, belt, proximity switches, limit switches, switch quantity control, position control, time sequence logical control and position control of DC motor.
Ÿ User Manual.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Liquid Mix Training Set

Ÿ Digunakan sebagai perangkat untuk pelatihan kontrol otomatis pada proses pencampuran cairan menggunakan pemrograman PLC.
Ÿ Input power : DC 24V
Ÿ Capacity : < 500VA
Ÿ Part list:
Ÿ Mixing device
Ÿ Material storage
Ÿ Stirring motor
Ÿ Stirring impeller
Ÿ Solenoid valve
Ÿ PLC I/O interface on the control panel.
Ÿ User Manual.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Rabu, 28 Februari 2024

Belt-Drive Training Equipment

Ÿ Digunakan sebagai perangkat untuk pelatihan pengendalian PLC, Sensor dan Motor.
Ÿ Inputpower:24VDC
Ÿ Partlist:
Ÿ A variety of sensor applications, the assembly and
disassembly of mechanical parts and electrical parts, system fault diagnosis and maintenance, pneumatic circuit adapter tube and electrical connections, the design and application of sorting transmission, find mistakes and correct electrical circuit, PLC basic instruction practice, Electric circuit connection, Instruction program writing.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Hidrostatic Trainer

Ÿ Trainertekananudara

Ÿ Input:0-250inch

Ÿ Output:4-20mA

Ÿ Supply:220VAC

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Basic Electro Hydraulic Training System

Ÿ Digunakan sebagai perangkat untuk pelatihan elektro hidrolik dasar.
Ÿ Hydraulic power unit:
Ÿ Work power : AC 380V
Ÿ Frequency : 50Hz
Ÿ Safety rate-limiting range : 1000- 1500 r/
Ÿ Flow : approx. 4.5L/
Ÿ Oil box volume : approx. 35Ltr
Ÿ Gear pump system: motor pump using open shelf installation,
structure compact, low noise, easy to maintenance.
Ÿ Part list:
Ÿ Training table, Hydraulic station, Double acting hydraulic cylinder, throttle valve, One-way throttle valve, Pressure relief valve (directly actuated), 4/3 Way solenoid valve (M) ,4/3 Way solenoid valve (O), 4/3 Way solenoid valve (Y), 4/3 Way solenoid valve (H), 4/2 Way solenoid valve, 4/2 Way manual shuttle valves, Speed regulator valve , Pilot Relief Valve, Pressure relief valve (pilot actuated), Pilot pressure reducing valve, Hydraulic control one-way valve, One-way valve, Pressure relay, T connector, Five way connector, hydraulic distributor, Glycerin pressure gauge, Hose 0.6m, Hose 1m, Hose 1.5m, DC power module, Relay module, Button switch module, power unit for hydraulic pump, Photoelectric sensor, Capacitive sensor, Inductive sensor, Micro switch module (left), Micro switch module (right), Test line, Toolkit, Hydraulic Simulation Software. Manual book, Experiments module
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

DC Motor Start Speed Control Training Equipment

Ÿ Digunakansebagaiperangkatuntukpelatihansekaligusalat ukur pada pelatihan / percobaan pengaturan kecepatan motor listrik
Ÿ Technicalparameter:
Ÿ Inputvoltage:single-phase
Ÿ threewire220V±10%50HZ
Ÿ Theworkingenvironment:
Ÿ temperaturerangeof-5~40
Ÿ Installedcapacity:AC<1.5KVA
Ÿ DC:excitationpower<0.5A
Ÿ Armaturesupply<2A
Ÿ Totalpowercontrol:withleakageprotection
Ÿ Equipped with AC220V safe terminal and DC24V secure
terminal extraction leads
Ÿ Adjustablepower:
Ÿ Armaturesupply:DC0-220V5A
Ÿ ExcitationPower:DC220V2A
Ÿ Partlist:
Ÿ Control panel,workbench, frequency converter component,
relay contacts training module, digital analog input and output given instruction component, three-phase asynchronous motor, motor rails, speed mechanism and other components.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Pneumatic Robot Training System

Ÿ Digunakan sebagai perangkat untuk pelatihan tentang robot.
Ÿ TechnicalParameter
Ÿ Inputpower:single-phase
Ÿ threewireAC220V±10%50Hz/60Hz
Ÿ Capacity:<200VA
Ÿ Circuit:DC24V
Ÿ Workenvironment:-10~40
Ÿ OptionalComputer
Ÿ Computertable
Ÿ PLCmodule
Ÿ PCsoftware
Ÿ Aircompressor
Ÿ Partlist:
Ÿ Trainingplatformbase
Ÿ PTPRobottrainingsystem
Ÿ Experimentcable
Ÿ Accessoriesandspareparts
Ÿ Softwareandmaterial
Ÿ Learningsoftware
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Optical Electromechanical Integration Training Equipment

Ÿ mengenai sistim otomasi lengkap dengan berbagai macam aktuator dan sensor untuk pendeteksian berbagai macam bahan material
Ÿ produksi.
Ÿ AC power : Single-phase AC220V ±10% 50Hz/60Hz
Ÿ Air compressor :
Ÿ Single-phase AC 220V, approx. 0.37 KVA
Ÿ Air flow : approx. 10L
Ÿ Discharge pressure : 0.6~0.8MPa
Ÿ Work pressure : approx. 0.6MPa
Ÿ Part list :
Ÿ Training platform, Material conveyor components, Belt
conveyer components, Detection unit, Rotating robot parts, Upright walking robot, Terminal block, Warning Lights, Sampling and testing materials, Safety Plug, Air tube, Air Compressor, Safety test leads. Manual book, Experiment module
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Module Praktik Robot Industri

Digunakan untuk pelatihan lengan robot pada industri a. Robot : Scara Robots

i. Panjang Lengan : sekitar 400 mm
ii. Payload : Max 3 kg, rated 1 kg
iii. power requirements : AC 100-240 V
iv. Maksimum kecepatan operasi : sekitar 1000 mm/sec

b. PLC
c. Sistem Gripper

i. Gripper : Module gripper set

ii. Finger : Costum finger, material Aluminium /SUS 304 d. Booth : Booth dengan material Aluminium profile
e. Sistem pneumatic
f. Sistem elektrik:

i. Panel box "lokal” ii. Sensor
iii Accesories

g. Laptop dengan dilengkapi software asli i. Sistem operasi
ii software robot
iii software PLC

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Modular Product System

Ÿ Digunakan untuk pembelajaran mengenai rangkaian sistim pengaturan dan komunikasi PLC peralatan otomasi industri secara riil dan lengkap

Ÿ Air service (1 pcs), Mini cylinder (1pcs),

Swing cylinder (1 pcs), Solenoid valve (3 pcs), Vacuum generator ( 1 pcs), Vacuum chuck (1 pcs), Fiber optic sensor ( 2 pcs), Magnetic switch ( 2 pcs), PLC unit (1 pcs),Ÿ Touch panel unit ( 1 pcs), Control panel (1 pcs), Station size (1 pcs);

Ÿ 2. Testing station :

Ÿ Biaxial cylinder PLC unit Control, Panel

Platform body (1 pcs), Workpiece detection device ( 1 pcs), Pusher cylinder device (1 pcs), Solenoid valve (4 pcs), Magnetic switch (6 pcs), Capacitive sensor (1 pcs), Photoelectric sensors (1 pcs), Inductive sensors (1 pcs), Detection sensor, PLC unit (1 pcs), Control panel (1 pcs), Station size (1 pcs);

3. Processing Station

Biaxial cylinder (1 pcs), Chute, Servo controller (1 pcs), Servo motor (1 pcs), Drilling cylinder lifting device(1 pcs), Drilling Motor (1 pcs), Pushing gas cylinder, Clamp cylinder (1 pcs), Detection, cylinder (1 pcs), Slider (1 pcs), Solenoid valve, Photoelectric sensors (1 pcs), Inductive sensors (1 pcs), Magnetic switch (5 pcs), PLC unit (1 pcs), Control panel (1 pcs), Station size (1 pcs);

4. Handling station

Boom cylinder (1 pcs), Swing cylinders (1 pcs), Arm cylinder (1 pcs), Waste tank (1 pcs) , Vacuum generator (1 pcs), Vacuum chuck (1 pcs), Solenoid valve (4 pcs), Magnetic switch (6 pcs), PLC unit (1 pcs), Control Panel (1 pcs), Platform body (1 pcs);
5. Sorting and storage station Protruding cylinder (1 pcs), Gas finger (1 pcs), Servo controller (2 pcs), Servo motor (2 pcs),
Solenoid valve (2 pcs), Fiber optic sensor and amplifier (2 pcs), Magnetic switch (4 pcs), PLC unit (1 pcs), Control Panel (1 pcs), Platform body (1 pcs).

Ÿ Part list:

Ÿ 1. Distribution station :

Ÿ 1. Input Power: Single phase ~ 220V ± 10% 50Hz

Ÿ 2. Leakage protection: I 0.1S
n ≤ 30mA, t ≤

Ÿ 3. AC220V AC power

Ÿ 4. 24 V DC power output

Ÿ 5. Accident emergency stop button, power

indicator, power indication

Ÿ 6. Power off misuse power protection

Ÿ 7. Installed capacity: ≤ 5kVA

Ÿ 8. Operation compressed air: 5 ~ 6bar

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Hydraulic & Pneumatic System Integration Trainer

Ÿ untuk mempelajari kombinasi pneumatik dan hidrolik industri yang dikontrol oleh PLC
Ÿ Outputvoltage380V/220V,DC
Ÿ voltage24V.Thesupplyvoltage:
Ÿ three-phasefive-wireAC380V±
Ÿ 5%,50Hz;controlvoltage:DC24V/+12V;
Ÿ Machinecapacity:≤1kVA;
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Hydraulic 4 Trainer Controlled By PLC

Ÿ Untuk mempelajari dasar dasar hidrolika industri yang sudah dikontrol oleh PLC
Ÿ The supply voltage: three-phase
Ÿ five-wire AC 380 V ± 5%, 50Hz;
Ÿ control voltage: DC 24V / +12 V; Ÿ Machine capacity: ≤ 1 kVA;
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Pneumatic Trainer Controlled By PLC

Ÿ Untuk mempelajari dasar dasar pneumatic industri yang sudah di kontrol oleh PLC
Ÿ The supply voltage: three-phase five-wire AC 380 V ± 5%, 50Hz;
Ÿ control voltage DC 24V / +12 V; Ÿ Machine capacity: ≤. 1 kVA;
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Motor & Electrical Control Trainer

Ÿ Untuk mempelajari cara kerja motor listrik dan kinerjanya sebagai mesin utama di industri
Ÿ 1. Working power: three-phase five-wire AC 380V±10% 50Hz;
Ÿ 2.Overallpowerconsumption:≤.1.5KW;
Ÿ 3. Safety protections: grounded, lead protection,
using insulated safety sockets
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Servo Motor Trainer

Ÿ Digunakan untuk menjelaskan karakteristik dan pemasangan motor servo
- Ÿ AC Power: Single phase AC220V ± 10% 50Hz
- Ÿ Air pressure: 0.4 MPa to 0.6 MPa
- Ÿ Drive Type: AC 220V, approx. 400W servo motor
- Ÿ Part list:
- Ÿ PLC module, the operation button module, the servo drive module, pneumatic module, various sensors, and other components, according to the training needs for flexible combination of modules. Manual book, Experiment module.
  Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Digital Circuit Training Kit

Ÿ Digunakan sebagai perangkat untuk pelatihan tentang rangkaian digital.
Ÿ Input power: single-phase, AC 220V±10% , 50Hz/60Hz
Ÿ Output power : DC+5V
Ÿ continuously adjustable, DC±12V
Ÿ One set adjustable signal source, one set of fixed
pulse.
Ÿ Part list:
Ÿ Digital experiment box, Power area, manual pulse source, signal generator, frequency meter unit, Resistance part, capacitance part, Integrated circuit, Logic level show, logic level output unit, Bread board area unit, Power line, Testing line. Manual book, Experiment module.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Motor & Transformer Maintenance & Test Training System

Ÿ Digunakan untuk pembelajaran mengenai motor listrik dan transformator, antara lain :
Ÿ melepas lilitan motor, menggulung ulang, merakit, analisa data, dan keterampilan
Ÿ lain mengenai transformator 1PH, motor induksi 1PH, motor
Ÿ induksi 3PH, dan sebagainya.
Ÿ Input power: three-phase, 380V±10% 50Hz/60Hz
Ÿ Output power : AC380V ± 10%
Ÿ 50Hz, AC220V ± 10% 50Hz
Ÿ Security :
Ÿ leakage protection (action current ≤ 30mA), overcurrent
protection,
Ÿ fuse protection.
Ÿ Part list:
Ÿ 3PH AC adjustable power supply,
Ÿ DC power supply,
Ÿ DC measurement instrument, AC measurement instrument &
Ÿ digital multi-function wattmeter,
Ÿ Motor power supply and test
Ÿ instrument,
Ÿ Motor inserting tools,
Ÿ Manual digital winding counter.
Ÿ Manual book
Ÿ Experiment module.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

CNC Trainer

Ÿ Digunakan untuk pengenalan dan pelatihan pemrograman CNC, pembuatan program CNC dan pengerjaan benda kerja menggunakan simulasi mesin bubut dan mesin frais CNC
Ÿ CNC Trainer terdiri dari:
Ÿ Panel Kontrol Unit (Mesin NC), Komputer Unit, dan
Software, yang tertanam dalam satu kesatuan unit
CNC Trainer.
Ÿ Konfigurasi CNC Trainer :
Ÿ Panel Kontrol Unit (Mesin NC)
Ÿ Mesin NC.
Ÿ Monitor : LCD 800 x 600; 7,5"
Ÿ MDI Keyboard
Ÿ Komputer Unit
Ÿ Monitor : LCD 1024 x 768; 18",
Ÿ Memory : 2GB
Ÿ Harddisk : 320GB
Ÿ Sistem operasi : OS yang
Ÿ mendukung
Ÿ Software simulasi :
Ÿ - Sistem simulasi CNC-Bubut
Ÿ - Sistem simulasi CNC-Milling
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Basic Electro Pneumatic Training System

Ÿ Digunakan sebagai perangkat untuk pelatihan elektro pneumatik dasar.
Ÿ DC power:
Ÿ Input, AC220V, 50Hz/60 Hz
Ÿ Output: DC 24V/3A
Ÿ Air compressor:
Ÿ Power: AC 220V±10% 50Hz/60Hz
Ÿ Motor power: approx. 480W Nominal volume: approx. 6L
Ÿ normal
Ÿ Output approx. 0.8 Mpa
Ÿ Noise degree: approx. 66 dB”
Ÿ Part list:
Ÿ Workbench, Silent Air compressor, Manifold block (air terminal), Double-
acting cylinder, Single-acting cylinder, 5/3 solenoid directional valve central vented, 5/3 solenoid directional valve central exhaust, 5/3 solenoid directional valve central pressure, 5/2 single solenoid shuttle valve, 5/2 double solenoid shuttle valve, 3/2 single solenoid shuttle valve NC, 3/2 single solenoid shuttle valve NO, Mushroom button valves, 5/2 handle shuttle valve, 5/3 handle shuttle valve, Single pneumatic control 3/2, Double pneumatic control 3/2, Single pneumatic control 5/2, Double pneumatic control 5/2, Dyad(pressure regulator & air filter), Reducing valve, One-way valve, Pressure gauge, One-way throttle valve, 3/2 knob valve, 3/2 Stroke valve, 3/2 Stroke valve, 3/2 Push Botton Valve, Time delay valve, Sequence valve, "And" gate-type dual pressure Valve, “Or” gatetype shuttle valve, Quick escape valve, Micro switch valve (left trigger), Micro switch valve (Right trigger), Photoelectric Sensor,capacitive sensor, Conductive sensor, Test wire, DC power supply unit, Relay, Button switch unit, Hose Ф4, Hose Ф6, 4 T Valve, T connection, APG reducing straight coupling, Tool kits, Pneumatic Simulation software. Manual book, Experiment modul
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Residential & Building Intelligent Control Training System

Ÿ Digunakan sebagai perangkat untuk pelatihan kontrol distribusi listrik pada perumahan dan gedung
Ÿ Inputpower:single-phase,threee-wireAC220V±10%50Hz/60Hz
Ÿ Power supply control : Automatic air switch on/off power supply, with
overcurrent protection, leakage protection devices
Ÿ Outputpower:DC24V/3A,withlimitingcurrenttypeshort-circuitsoftprotection
and self-recovery function
Ÿ Partlist:
Ÿ MultifunctionalSmartPanel
Ÿ 4-wayswitchoutputmodule10A
Ÿ 2-waysmartcurtaincontroller
Ÿ Single-portbusswitch
Ÿ LogicController
Ÿ Twelveinonesensor
Ÿ PowerModules
Ÿ DimmingModule
Ÿ Electriccurtains
Ÿ Software
Ÿ UserManual
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Electrical Maintenance Skill Training Workbench

Ÿ Digunakan sebagai perangkat pelatihan sekaligus alat ukur untuk perakitan dan karakteristik rangkaian dasar listrik dan pencahayaan umum
Ÿ Inputpower:Three-phase,AC380V±10%50Hz/60Hz
Ÿ Outputpower:AC380Vsafetyterminaloutput
Ÿ outputpowerindicatorAC220Vsafetysocketoutput
Ÿ rockerswitchcontrolDC1.25-30V±10%safety
Ÿ terminaloutput(Includingvoltage,ammeterindicationfunction)
Ÿ Partlist:
Ÿ Training platform, power box (breaker, power light, wall socket, ship
type switch, DC digital ampere meter, fuse holder, LED base, Emergency stop switch, etc.), meter box(pressure change over switch, acive powermeter, terminals, etc.), frame, patch board, fixed fitting seat, dry-wall nails, doubleinsultiontest lines.
Ÿ Manualbook,Experimentmodule.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Step Motor Training Set

Ÿ Digunakan sebagai perangkat untuk pelatihan pengendalian pergerakan pada program menggunakan motor stepper
Ÿ Inputvoltage:
Ÿ singlephaseAC220V+10%50Hz;
Ÿ SafetyProtection:overcurrentDC:DC24VPower
Ÿ "Screwstroke:approx.300mm
Ÿ Lead:approx.5mm”
Ÿ Partlist:
Ÿ PLC, switching power supply, sensor part, stepper drive module,
stepper motors and other components.
Ÿ Training sets using a special mold profiles, anodized coating
processing, scientific structure, the bottom adjuster, height adjustable,
to ensure a smooth degree, bracket aluminum structure (surface
Ÿ electrophoresis).
Ÿ Manualbook,Experimentmodule.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Servo Motor Trainer

Ÿ Digunakan untuk menjelaskan karakteristik dan pemasangan motor servo
Ÿ ACPower:SinglephaseAC220V±10%50Hz
Ÿ Airpressure:0.4MPato0.6MPa
Ÿ DriveType:AC220V,approx.400Wservomotor
Ÿ Partlist:
Ÿ PLCmodule
Ÿ theoperationbuttonmodule
Ÿ theservodrivemodule
Ÿ pneumaticmodule
Ÿ varioussensorsandothercomponents
Ÿ accordingtothetrainingneedsforflexiblecombinationof
modules.
Ÿ Manualbook&Experimentmodule.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Frequency Control Speed Regulation Experiment System

Ÿ Digunakan sebagai perangkat untuk pelatihan sekaligus alat ukur pada pelatihan / percobaan pengaturan kecepatan dari kinerja sistem kontrol yang menggunakan variabel frekuensi.
Ÿ Inputpower:three-phase,fivewireAC380V±10%50Hz/60Hz
Ÿ Outputpower:AC380Vsafetyterminaloutput
Ÿ Capacity:<1KVA
Ÿ Partlist:
Ÿ Controlpane
Ÿ workbench
Ÿ frequencyconvertercomponent
Ÿ relaycontactstrainingmodule
Ÿ digitalanaloginputandoutputgiveninstructioncomponent
Ÿ three-phaseasynchronousmotor
Ÿ motorrails
Ÿ speedmechanismandothercomponents.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Power Supply & Distribution on Duty Electrician Assessment Training System

Ÿ Digunakansebagaiperangkatuntukpelatihanpemasanganinstalasi listrik pada gardu induk serta pendistribusian listrik tegangan rendah - tinggi
Ÿ Maincircuitratedvoltage:AC380V
Ÿ Auxiliarycircuitvoltage:AC220V
Ÿ Ratedfrequency:50(60)Hz
Ÿ Ratedinsulationvoltage:660V
Ÿ Ratedcurrent:horizontalbus100A
Ÿ Verticalbus(MCC)100A
Ÿ Bus:three-phasefive-wiresystemA,B,C,PE,N)
Ÿ Partlist:
Ÿ Set of cabinets: weighing counter (2), into the line cabinet (2), the
capacitor compensation cabinet (2), drawer cabinet (2), and bus
connection cabinet (1).
Ÿ Analog load: asynchronous motor,AC380V 2.2KW 1400rpm,
horizontal (4 sets)
Ÿ Usermanual
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Electricity Protection Training System

Ÿ Digunakan sebagai perangkat untuk pelatihan perakitan sistem proteksi pada jaringan listrik
Ÿ Input power Single-phase, AC220V ± 10% 50Hz/60Hz
Ÿ Partlist:
Ÿ 22 independent teaching modules, including power box, body
resistance module, body electric shock module, step voltage module, safety ground module, direct electric shock module, indirect electric protection module and insulator monitor module, etc.
Ÿ The device has a power supply detection and indication, shortcircuit current protection, overload protection, groundprotection, leakage protection and other functions to guarantee the safety of students.
Ÿ Manualbook&experimentmodule
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Primary Electrical Lighting Skills Assessment Training Device

Ÿ Digunakan sebagai perangkat untuk pelatihan perakitan instalasi dan penerangan listrik tegangan rendah
Ÿ Workingpower:three-phase380V±10%,50Hz/60Hz
Ÿ Partlist:
Ÿ Workbench
Ÿ Power part (Leakage circuit breaker, AC contactor, AC
voltmeter, set of lights, key switch, emergency stop, set of
fuses,timeralarmrecorder, etc.)
Ÿ Measuring instruments (AC voltmeter, AC ammeter, 3PH
power meter, 1PH power meter, poer factormeter, etc.)
Ÿ 2setsofmodules
Ÿ Tesline
Ÿ Manualbook
Ÿ experimentmodule.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Basic Electric Training System

Ÿ Digunakan sebagai perangkat pelatihan sekaligus alat ukur untuk menjelaskan karakteristik rangkaian dasar listrik
Ÿ Inputpower:three-phaseAC380V±10%50Hz/60Hz
Ÿ Outputpower:AC380V±10%50Hz/60Hz,AC220V±10%50Hz/60Hz
Ÿ Partlist:Single-phase
Ÿ transformermodule
Ÿ Fuse
Ÿ Rheostatmodule
Ÿ Loadmodule
Ÿ Rectifiermodule
Ÿ Ampere-voltage
Ÿ metermodule
Ÿ testline
Ÿ Manualbook
Ÿ experimentmodule.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Kontak Kami

Kamis, 29 Februari 2024

Rabu, 28 Februari 2024