AUTOMATION JAYA

Kamis, 29 Februari 2024

Combination Starter & Alternator Training System

Ÿ Untuk mempelajari korelasi kerja antara motor starter dengan alternator lengkap dengan sirkuitnya
Ÿ Composition : Main body stand, 2 second phase of resistive heater, 2 sets of lighting system, 2 sets of resistance-modulating lighting system, power supplier, inverter for controlling speed of volt meter ampere motor, generator, etc.

Ÿ Motor : three phases 380V, approx. 3HP motor
Ÿ - Equipment of transparent polycarbonate in motor drive parts, stand aluminum profile.
Ÿ 2 Training Contents
Ÿ Manual Book
Ÿ Modul Stater and Charging System

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Motor Starter & Alternator Test Bench

Ÿ Untuk mendiagnosa kekuatan motor starter,mengetahui voltage dan arus yang diterima maupun yang dikeluarkan oleh motor starter
Ÿ Composition
Ÿ 1) Voltage meter : approx. 50V
Ÿ (digital type)
Ÿ 2) Current meter : approx. 500A
Ÿ (digital type)
Ÿ 3) Stand : 1ea, Tester cable clip,
Ÿ Operation lamp, Switch, Generator motor
Ÿ 2 Training Contents
Ÿ Manual Book

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Basic Lighting Electrical Circuit System Trainer

Ÿ Mempelajaridasarkelistrikanlampukendaraan

Ÿ Composition:Taillight,FogLights,
Ÿ DirectionLight,Horn,Wiper
Ÿ 1TrainingContents

Ÿ ManualBook
Ÿ ModulBasicLightingElectricalSystem

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Automotive Basic Electric Circuit Trainer

Ÿ Mempelajari prinsip dasar kelistrikan otomotif
Ÿ Composition: voltage: 30A, Working voltage: DV12V,
Ÿ Relay capacity : approx. 30A, Lamp : approx. 1.4W and 55W, Main fuse : approx. 30A, Relay fuse : approx. 10A, 1.0SQ Jump wire : 48 set
Ÿ 2 Training Contents
Ÿ Manual Book
Ÿ Modul Automotive Basic Electrical
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

ABS Simulator with Fault Diagnosis with 4 axis

Ÿ Untuk mempelajari sistem kerja rem ABS lengkap dengan sirkuitnya, tekanan hidrolisnya, dan dapat melakukan trouble shooting. Ÿ Driven by reduction motor single
Ÿ phase 220V Training Contents
Ÿ Various element by self-diagnosis.
Ÿ Removing the air from the brake.
Ÿ Replacing brake oil.
Ÿ Replacing pad.
Ÿ Hydraulic system Inspection.
Ÿ ABS circuit verification.
Ÿ Able to demonstrate the failure test.
Ÿ (arbitrarily)
Ÿ Manual Book
Ÿ Modul ABS Simulator with Fault
Ÿ Diagnosis with 4 axis
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Commonrail Diesel Test Bench

Ÿ Untuk kalibrasi dan analisa pompa dan injector diesel yang sudah dikontrol oleh komputer, dan mengkalibrasi sesuai dengan standar bawaan pabrik.
Ÿ Testingpumpandtestinginjector.
Ÿ Technicalparameters:
Ÿ 1.Motorpower:approx.7.5KW
Ÿ 2.Electronicpower:3phase380Vor1phase220V
Ÿ 3.Motorspeed:0-4000RPM
Ÿ 4.Presureadjustment:0-2000bar
Ÿ 5.Flowtestingrange:0-600ml/approx.1000times
Ÿ 6.Flowmeasurementaccuracy:approx.0.1ml
Ÿ 7.Coolingsystem:fanorforcedcooling
Ÿ 8.ManualBook
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Automotive Sensor Simulator

Ÿ Untuk mempelajari sensor-sensor secara khusus yang telah dikontrol oleh EMS, dilengkapi dengan instrumen pengukuran.
Ÿ Composition : Crank angle sensor,
Ÿ A/T pulse generator sensor, cam position sensor, ABS wheel sensor, humidity sensor, AQS sensor, Engine temperature sensor, Automatic light sensor, knock sensor, speed sensor, Accelerator position sensor, oxygen sensor, throttle position sensor, air flower sensor, map sensor, safety sensor
Ÿ 10 Training Contents
Ÿ Manual Book
Ÿ Modul EMS
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Advanced Electro Pneumatic Training System

Ÿ Digunakan sebagai perangkat pelatihan

Ÿ pneumatik tingkat lanjut dimana menggunakan PLC

Ÿ DC power:

Ÿ input: AC 220V, Output: DC 24V/3A

Ÿ Air compressor: power: AC 220V±10% 50Hz motor power: approx. 600W

Ÿ Noal volume: approx. 9L

Ÿ noal output pressure approx. 0.7MPa,noise degree: approx. 66dB

Ÿ Par list:

Ÿ Workbench

Ÿ Silence Air compressor

Ÿ Manifold block

Ÿ Double-acting cylinder

Ÿ Single-acting cylinder 5/3 solenoid directional valve

Ÿ central vented 5/3 solenoid directionalŸ valve

Ÿ central exhaust 5/3 solenoid directiona Valve

Ÿ central pressure

Ÿ 5/2 single solenoid shuttle valve

Ÿ 5/2 double solenoid shuttle valve

Ÿ 3/2 single solenoid shuttle valve NC

Ÿ 3/2 single solenoid shuttle valve

Ÿ NO Mushroom button valves

Ÿ 5/2 handle shuttle valve, 5/3

Ÿ handle shuttle valve, Single

Ÿ pneumatic control 3/2, Double

Ÿ pneumatic control 3/2, Single

Ÿ pneumatic control 5/2, Double

Ÿ pneumatic control 5/2, Filter,

Ÿ regulator and lubricator ,

Ÿ Reducing valve, One-way valve,

Ÿ Pressure gauge, One-way throttle

Ÿ valve, 3/2 knob valve, 3/2 Stroke valve type A

Ÿ 3/2 Stroke valve type B, 3/2 button valve

ŸTime delay valve Sequence valve

Ÿ "And" gate-type dual pressure Valve

Ÿ “Or” gate-type shuttle valve Quick escape valve

Ÿ Micro switch valve (left trigger) Micro switch valve (Right trigger) Photoelectric Sensor Capacitivesensor

Ÿ Conductive sensor Testwire

Ÿ PLC module

Ÿ PLC program software Download wire

Ÿ DC power

Ÿ Relay

Ÿ Button switch

Ÿ HoseФ4 black&blue 50m HoseФ6 blue 20m

Ÿ 4T valve

Ÿ T connection

Ÿ APG reducing straight coupling Tools

Ÿ Manual

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Step Motor Training Set

Ÿ Digunakan sebagai perangkat untuk pelatihan pengendalian pergerakan pada program menggunakan motor stepper
Ÿ Inputvoltage:
Ÿ singlephaseAC220V+10%
Ÿ 50Hz;SafetyProtection:overcurrent
Ÿ DC:DC24VPower
Ÿ "Screwstroke:approx.300mm
Ÿ Lead:approx.5mm”
Ÿ Partlist:
Ÿ PLC, switching power supply,sensor part, stepper
drive module, stepper motors and other components. Training sets using a special mold profiles, anodized coating processing, scientific structure, the bottom adjuster, height adjustable, to ensure a smooth degree, bracket aluum structure (surface electrophoresis). Manual book, Experiment module.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Basic Pneumatic Training System

Ÿ Digunakansebagaiperangkatuntukpelatihanpneumatikdasar.

Ÿ Powerunit-aircompressor(Basicconfiguration

Ÿ icomputers)
Ÿ Powersource:AC220V±10%50Hz/60Hz

Ÿ Motorpower:480W
Ÿ Noalvolume:approx.6LRatedoutputpressure:approx.0.85MPa

Ÿ Partlist:
Ÿ Workbench,SilentAircompressor,Manifoldblock,
Ÿ Double-actingcylinder,Singleactingcylinder,Mushroombutton
Ÿ valves,3/2buttontypemodule,
Ÿ 5/3handleshuttlevalve,5/2
Ÿ handleshuttlevalve,Single
Ÿ pneumaticcontrol3/2,Double
Ÿ pneumaticcontrol3/2,Single
Ÿ pneumaticcontrol5/2,Double
Ÿ pneumaticcontrol5/2,Reducing
Ÿ valve,One-wayvalve,Pressure
Ÿ guage,One-waythrottlevalve,
Ÿ 3/2strokevalve,Timedelay
Ÿ valve,Sequencevalve,"And"Gate
Ÿ typedualpressurevalve,
Ÿ "Or"Valve,Quickescapevalve,
Ÿ HoseФ4,HoseФ6,4Tvalve,"T”
Ÿ Connection,APGreducing
Ÿ straightcoupling,Toolkits,
Ÿ Pneumaticsimulatorsoftware.
Ÿ Manualbook,Experimentmodule

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

MCU Training Set

Ÿ Digunakan sebagai perangkat untuk pelatihan/percobaan tentang micro computer dasar.
Ÿ Poweroutput:
Ÿ ±5Vdcvoltagesource
Ÿ ±12Vdcvoltagesource
Ÿ Partlist:
Ÿ Workbench
Ÿ PowerSupply
Ÿ Signalgenerator
Ÿ DigitalCircuitcommonexperimentbox
Ÿ Gatecircuitexperimentbox
Ÿ Triggercircuitexperimentbox
Ÿ Digitallogiccircuitexperimentbox
Ÿ Pulsecircuitexperimentbox
Ÿ Componentsbox
Ÿ Analogcircuitexperimentbox
Ÿ MCUmodule
Ÿ Convertandextendmodule
Ÿ Sensoradaptormodule
Ÿ RelayModule
Ÿ Commandmodule
Ÿ Indicatormodule1
Ÿ Indicatormodule2
Ÿ Motormodule
Ÿ Motorexperiments
Ÿ Towerlight
Ÿ TrafficlightSimulator
Ÿ Cableset
Ÿ Manualbook,Experimentmodule.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Frequency Control Speed Regulation Experiment System

Ÿ Digunakan sebagai perangkat untuk pelatihan sekaligus alat ukur pada pelatihan / percobaan pengaturan kecepatan dari kinerja sistem kontrol yang menggunakan variabel frekuensi.
Ÿ Input power : three-phase, five Ÿ wire AC 380V±10% 50Hz/60Hz Ÿ Output power : AC 380V safety Ÿ teral output Capacity : < 1KVA Ÿ Part list:
Ÿ Control panel, workbench, frequency converter component, relay contacts training module, digital analog input and output given instruction component, three-phase asynchronous motor, motor rails, speed mechanism and other components
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Servo Motor Trainer

Ÿ Digunakan untuk menjelaskan karakteristik dan pemasangan motor servo
Ÿ ACPower:SinglephaseAC220V±10%50Hz
Ÿ Airpressure:0.4MPato0.6MPa
Ÿ DriveType:AC220V,approx.400Wservomotor
Ÿ Partlist:
Ÿ PLCmodule,theoperationbuttonmodule,theservo drive module, pneumatic module, various sensors, and other components, according to the training needs for flexible combination of modules. Manual book, Experiment
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831module.

Small Car Motion Training Equipment

Ÿ Digunakan sebagai perangkat untuk pelatihan kontrol gerakan mobil dengan koneksi sinyal sensor. Ÿ Input power : three phase
Ÿ AC 380V ± 10% 50Hz/60Hz
Ÿ Capacity : < 500VA
Ÿ Part list:
Ÿ Integrated sensor, ball screw, belt, proximity switches, limit switches, switch quantity control, position control, time sequence logical control and position control of DC motor.
Ÿ User Manual.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Liquid Mix Training Set

Ÿ Digunakan sebagai perangkat untuk pelatihan kontrol otomatis pada proses pencampuran cairan menggunakan pemrograman PLC.
Ÿ Input power : DC 24V
Ÿ Capacity : < 500VA
Ÿ Part list:
Ÿ Mixing device
Ÿ Material storage
Ÿ Stirring motor
Ÿ Stirring impeller
Ÿ Solenoid valve
Ÿ PLC I/O interface on the control panel.
Ÿ User Manual.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Rabu, 28 Februari 2024

Belt-Drive Training Equipment

Ÿ Digunakan sebagai perangkat untuk pelatihan pengendalian PLC, Sensor dan Motor.
Ÿ Inputpower:24VDC
Ÿ Partlist:
Ÿ A variety of sensor applications, the assembly and
disassembly of mechanical parts and electrical parts, system fault diagnosis and maintenance, pneumatic circuit adapter tube and electrical connections, the design and application of sorting transmission, find mistakes and correct electrical circuit, PLC basic instruction practice, Electric circuit connection, Instruction program writing.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Hidrostatic Trainer

Ÿ Trainertekananudara

Ÿ Input:0-250inch

Ÿ Output:4-20mA

Ÿ Supply:220VAC

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Basic Electro Hydraulic Training System

Ÿ Digunakan sebagai perangkat untuk pelatihan elektro hidrolik dasar.
Ÿ Hydraulic power unit:
Ÿ Work power : AC 380V
Ÿ Frequency : 50Hz
Ÿ Safety rate-limiting range : 1000- 1500 r/
Ÿ Flow : approx. 4.5L/
Ÿ Oil box volume : approx. 35Ltr
Ÿ Gear pump system: motor pump using open shelf installation,
structure compact, low noise, easy to maintenance.
Ÿ Part list:
Ÿ Training table, Hydraulic station, Double acting hydraulic cylinder, throttle valve, One-way throttle valve, Pressure relief valve (directly actuated), 4/3 Way solenoid valve (M) ,4/3 Way solenoid valve (O), 4/3 Way solenoid valve (Y), 4/3 Way solenoid valve (H), 4/2 Way solenoid valve, 4/2 Way manual shuttle valves, Speed regulator valve , Pilot Relief Valve, Pressure relief valve (pilot actuated), Pilot pressure reducing valve, Hydraulic control one-way valve, One-way valve, Pressure relay, T connector, Five way connector, hydraulic distributor, Glycerin pressure gauge, Hose 0.6m, Hose 1m, Hose 1.5m, DC power module, Relay module, Button switch module, power unit for hydraulic pump, Photoelectric sensor, Capacitive sensor, Inductive sensor, Micro switch module (left), Micro switch module (right), Test line, Toolkit, Hydraulic Simulation Software. Manual book, Experiments module
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

DC Motor Start Speed Control Training Equipment

Ÿ Digunakansebagaiperangkatuntukpelatihansekaligusalat ukur pada pelatihan / percobaan pengaturan kecepatan motor listrik
Ÿ Technicalparameter:
Ÿ Inputvoltage:single-phase
Ÿ threewire220V±10%50HZ
Ÿ Theworkingenvironment:
Ÿ temperaturerangeof-5~40
Ÿ Installedcapacity:AC<1.5KVA
Ÿ DC:excitationpower<0.5A
Ÿ Armaturesupply<2A
Ÿ Totalpowercontrol:withleakageprotection
Ÿ Equipped with AC220V safe terminal and DC24V secure
terminal extraction leads
Ÿ Adjustablepower:
Ÿ Armaturesupply:DC0-220V5A
Ÿ ExcitationPower:DC220V2A
Ÿ Partlist:
Ÿ Control panel,workbench, frequency converter component,
relay contacts training module, digital analog input and output given instruction component, three-phase asynchronous motor, motor rails, speed mechanism and other components.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Pneumatic Robot Training System

Ÿ Digunakan sebagai perangkat untuk pelatihan tentang robot.
Ÿ TechnicalParameter
Ÿ Inputpower:single-phase
Ÿ threewireAC220V±10%50Hz/60Hz
Ÿ Capacity:<200VA
Ÿ Circuit:DC24V
Ÿ Workenvironment:-10~40
Ÿ OptionalComputer
Ÿ Computertable
Ÿ PLCmodule
Ÿ PCsoftware
Ÿ Aircompressor
Ÿ Partlist:
Ÿ Trainingplatformbase
Ÿ PTPRobottrainingsystem
Ÿ Experimentcable
Ÿ Accessoriesandspareparts
Ÿ Softwareandmaterial
Ÿ Learningsoftware
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Optical Electromechanical Integration Training Equipment

Ÿ mengenai sistim otomasi lengkap dengan berbagai macam aktuator dan sensor untuk pendeteksian berbagai macam bahan material
Ÿ produksi.
Ÿ AC power : Single-phase AC220V ±10% 50Hz/60Hz
Ÿ Air compressor :
Ÿ Single-phase AC 220V, approx. 0.37 KVA
Ÿ Air flow : approx. 10L
Ÿ Discharge pressure : 0.6~0.8MPa
Ÿ Work pressure : approx. 0.6MPa
Ÿ Part list :
Ÿ Training platform, Material conveyor components, Belt
conveyer components, Detection unit, Rotating robot parts, Upright walking robot, Terminal block, Warning Lights, Sampling and testing materials, Safety Plug, Air tube, Air Compressor, Safety test leads. Manual book, Experiment module
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Module Praktik Robot Industri

Digunakan untuk pelatihan lengan robot pada industri a. Robot : Scara Robots

i. Panjang Lengan : sekitar 400 mm
ii. Payload : Max 3 kg, rated 1 kg
iii. power requirements : AC 100-240 V
iv. Maksimum kecepatan operasi : sekitar 1000 mm/sec

b. PLC
c. Sistem Gripper

i. Gripper : Module gripper set

ii. Finger : Costum finger, material Aluminium /SUS 304 d. Booth : Booth dengan material Aluminium profile
e. Sistem pneumatic
f. Sistem elektrik:

i. Panel box "lokal” ii. Sensor
iii Accesories

g. Laptop dengan dilengkapi software asli i. Sistem operasi
ii software robot
iii software PLC

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Modular Product System

Ÿ Digunakan untuk pembelajaran mengenai rangkaian sistim pengaturan dan komunikasi PLC peralatan otomasi industri secara riil dan lengkap

Ÿ Air service (1 pcs), Mini cylinder (1pcs),

Swing cylinder (1 pcs), Solenoid valve (3 pcs), Vacuum generator ( 1 pcs), Vacuum chuck (1 pcs), Fiber optic sensor ( 2 pcs), Magnetic switch ( 2 pcs), PLC unit (1 pcs),Ÿ Touch panel unit ( 1 pcs), Control panel (1 pcs), Station size (1 pcs);

Ÿ 2. Testing station :

Ÿ Biaxial cylinder PLC unit Control, Panel

Platform body (1 pcs), Workpiece detection device ( 1 pcs), Pusher cylinder device (1 pcs), Solenoid valve (4 pcs), Magnetic switch (6 pcs), Capacitive sensor (1 pcs), Photoelectric sensors (1 pcs), Inductive sensors (1 pcs), Detection sensor, PLC unit (1 pcs), Control panel (1 pcs), Station size (1 pcs);

3. Processing Station

Biaxial cylinder (1 pcs), Chute, Servo controller (1 pcs), Servo motor (1 pcs), Drilling cylinder lifting device(1 pcs), Drilling Motor (1 pcs), Pushing gas cylinder, Clamp cylinder (1 pcs), Detection, cylinder (1 pcs), Slider (1 pcs), Solenoid valve, Photoelectric sensors (1 pcs), Inductive sensors (1 pcs), Magnetic switch (5 pcs), PLC unit (1 pcs), Control panel (1 pcs), Station size (1 pcs);

4. Handling station

Boom cylinder (1 pcs), Swing cylinders (1 pcs), Arm cylinder (1 pcs), Waste tank (1 pcs) , Vacuum generator (1 pcs), Vacuum chuck (1 pcs), Solenoid valve (4 pcs), Magnetic switch (6 pcs), PLC unit (1 pcs), Control Panel (1 pcs), Platform body (1 pcs);
5. Sorting and storage station Protruding cylinder (1 pcs), Gas finger (1 pcs), Servo controller (2 pcs), Servo motor (2 pcs),
Solenoid valve (2 pcs), Fiber optic sensor and amplifier (2 pcs), Magnetic switch (4 pcs), PLC unit (1 pcs), Control Panel (1 pcs), Platform body (1 pcs).

Ÿ Part list:

Ÿ 1. Distribution station :

Ÿ 1. Input Power: Single phase ~ 220V ± 10% 50Hz

Ÿ 2. Leakage protection: I 0.1S
n ≤ 30mA, t ≤

Ÿ 3. AC220V AC power

Ÿ 4. 24 V DC power output

Ÿ 5. Accident emergency stop button, power

indicator, power indication

Ÿ 6. Power off misuse power protection

Ÿ 7. Installed capacity: ≤ 5kVA

Ÿ 8. Operation compressed air: 5 ~ 6bar

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Hydraulic & Pneumatic System Integration Trainer

Ÿ untuk mempelajari kombinasi pneumatik dan hidrolik industri yang dikontrol oleh PLC
Ÿ Outputvoltage380V/220V,DC
Ÿ voltage24V.Thesupplyvoltage:
Ÿ three-phasefive-wireAC380V±
Ÿ 5%,50Hz;controlvoltage:DC24V/+12V;
Ÿ Machinecapacity:≤1kVA;
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Hydraulic 4 Trainer Controlled By PLC

Ÿ Untuk mempelajari dasar dasar hidrolika industri yang sudah dikontrol oleh PLC
Ÿ The supply voltage: three-phase
Ÿ five-wire AC 380 V ± 5%, 50Hz;
Ÿ control voltage: DC 24V / +12 V; Ÿ Machine capacity: ≤ 1 kVA;
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Pneumatic Trainer Controlled By PLC

Ÿ Untuk mempelajari dasar dasar pneumatic industri yang sudah di kontrol oleh PLC
Ÿ The supply voltage: three-phase five-wire AC 380 V ± 5%, 50Hz;
Ÿ control voltage DC 24V / +12 V; Ÿ Machine capacity: ≤. 1 kVA;
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Motor & Electrical Control Trainer

Ÿ Untuk mempelajari cara kerja motor listrik dan kinerjanya sebagai mesin utama di industri
Ÿ 1. Working power: three-phase five-wire AC 380V±10% 50Hz;
Ÿ 2.Overallpowerconsumption:≤.1.5KW;
Ÿ 3. Safety protections: grounded, lead protection,
using insulated safety sockets
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Servo Motor Trainer

Ÿ Digunakan untuk menjelaskan karakteristik dan pemasangan motor servo
- Ÿ AC Power: Single phase AC220V ± 10% 50Hz
- Ÿ Air pressure: 0.4 MPa to 0.6 MPa
- Ÿ Drive Type: AC 220V, approx. 400W servo motor
- Ÿ Part list:
- Ÿ PLC module, the operation button module, the servo drive module, pneumatic module, various sensors, and other components, according to the training needs for flexible combination of modules. Manual book, Experiment module.
  Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Digital Circuit Training Kit

Ÿ Digunakan sebagai perangkat untuk pelatihan tentang rangkaian digital.
Ÿ Input power: single-phase, AC 220V±10% , 50Hz/60Hz
Ÿ Output power : DC+5V
Ÿ continuously adjustable, DC±12V
Ÿ One set adjustable signal source, one set of fixed
pulse.
Ÿ Part list:
Ÿ Digital experiment box, Power area, manual pulse source, signal generator, frequency meter unit, Resistance part, capacitance part, Integrated circuit, Logic level show, logic level output unit, Bread board area unit, Power line, Testing line. Manual book, Experiment module.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Motor & Transformer Maintenance & Test Training System

Ÿ Digunakan untuk pembelajaran mengenai motor listrik dan transformator, antara lain :
Ÿ melepas lilitan motor, menggulung ulang, merakit, analisa data, dan keterampilan
Ÿ lain mengenai transformator 1PH, motor induksi 1PH, motor
Ÿ induksi 3PH, dan sebagainya.
Ÿ Input power: three-phase, 380V±10% 50Hz/60Hz
Ÿ Output power : AC380V ± 10%
Ÿ 50Hz, AC220V ± 10% 50Hz
Ÿ Security :
Ÿ leakage protection (action current ≤ 30mA), overcurrent
protection,
Ÿ fuse protection.
Ÿ Part list:
Ÿ 3PH AC adjustable power supply,
Ÿ DC power supply,
Ÿ DC measurement instrument, AC measurement instrument &
Ÿ digital multi-function wattmeter,
Ÿ Motor power supply and test
Ÿ instrument,
Ÿ Motor inserting tools,
Ÿ Manual digital winding counter.
Ÿ Manual book
Ÿ Experiment module.
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Kontak Kami

Kamis, 29 Februari 2024

Rabu, 28 Februari 2024